Here is a list of the Commercial Quality Surface Cleaners
that we offer:
 |
WW2000 - Surface Cleaners
- 16" to 36"
- Operating Parameters 2,000 to 4,000 PSI
- Cold or Hot Water 212 Degrees Max
- 2" Nylon Brushes
- Weight 20 lbs.
|
 |
WW2800 - Big Guy
- Oversized 28" Diameter
- Lightweight Aluminum Housing
- PSI: 2,000 - 4,000
- Powder Coated For Durability
- 2 or 4 Nozzle Spray Bar
- Balanced & Machined Spray Bar
- Trigger Gun Control
- Hot or Cold Water Applications
|
  |
Whisper Wash® Maxima36
- 36" Surface Cleaner
- Quick Connection
- PSI: 2,000 - 4,000
- Trigger Gun Controlled
- Portable Breakaway Handle
- Heavy Duty Aluminum Cover
- Balanced & Machined Spray Bar
- Hot or Cold Water Applications
|
  |
Whisper Wash® Classic
- Quick Connection
- PSI: 2,000 - 4,000
- Trigger Gun Controlled
- Portable Breakaway Handle
- Lightweight Floating Cover
- Balanced & Machined Spray Bar
- Hot or Cold Water Applications
|
Frequently Asked Questions
Q - Can you rebuild the swivel components
of a Whisper Wash® Professional Rotary Spray System?
A - Yes! Unlike many other manufacturers, our
swivel is completely rebuildable. The Seal Kit is usually
all that is needed. Two bearings are utilized within
the swivel kit. The Shaft, if bent or broken, is replaceable
although this is not typical. When you ask for Whisper
Wash® by name you receive a system that can be maintained
over time.
Q - What is a balanced spray bar and how
does it affect a flat surface cleaner?
A - Whisper Wash® is the only manufacturer
to provide a balanced and machined spray bar. The precise
design and tested engineering built into every machined
spray bar provides for longer bearing and seal life
by eliminating unbalanced rotation. The spray tips are
also always at the correct angle with the balanced rotation
of the spray bar. It is superior to the pipe nipple
and hydraulic spray bars provided by other manufacturers
which are almost impossible to maintain a consistent
balanced rotation over time.
Q - Can I use hot water when cleaning with
a Whisper Wash® System?
A - Yes, without any problem. The entire product
line of Whisper Wash® Professional Rotary Spray
Systems may be used with either hot or cold water.
Q - What type of spray tips are supplied
with the machines?
A - Whisper Wash(TM) uses standard 1/4 meg
tips. The Big Guy is shipped with 25025 tips. The Classic
is equipped with 2502 tips. Other sizes may be used.
Q - How does the spray bar rotate under
the cover?
A - Whisper Wash® utilizes double row thrust
bearings within the swivel system of each machine to
facilitate the smooth rotation of the spray bar by water
pressure. The bearing surface area is two to four times
greater than most industry flat surface cleaners providing
greater rotational power.
Q - What are the covers made out of?
A - Classic: Xenoy plastic. This is the same
type of material car bumpers are made of. However the
Whisper Wash® Classic cover is stronger with a rating
of 350,000 PSI tensile strength.
The Big Guy: Powder coated aluminum with steel axle
assembly.
Q - How far are the tips from the ground?
A - The tips rotate approximately 1-1/2"
from the ground. This provides for consistent cleaning
of flat surfaces without the nuisance of zebra striping.
Q - What is the diameter that the water
flows through?
A - The swivel shaft, as well as the spray
bar is 3/8" through center.
Q - What about corrosion of machine parts?
A - Whisper Wash® uses only 6061 T6 Aluminum,
Stainless Steel, and other corrosion resistant materials
in building Professional Rotary Spray Systems.
|
